Specifications

INITIAL SETUP
You can use PowerNet 200 to connect
networkable devices like computers
and game consoles directly to each
other. You can also connect equipment
like a computer or Blu-ray Disc™
player to a router or modem
for internet access.
1.PlugbothPowerNet200sintothe
AC wall outlets near the devices
you want to connect.
For internet access, plug in one
PowerNet 200 into an AC wall outlet
near your router or modem that
is connected to the Internet.
2. Check the Network Speed light
on both PowerNet 200s and
confirm that it is ON. This tells
you that the PowerNet devices
can talk to each other. If the
Network Speed light is off, refer
to the troubleshooting section
at the end of the manual.
3. Once you have confirmed that
the PowerNet devices are talking
to each other, use the included
Ethernet cables to connect them
to the devices (modem/router,
computer, game console, etc.)
that you want to network.
See the diagram on page 6.