Specifications

ENGLISH ENGLISH
STEP 1: Set the Power Switch to Off
Make sure the power is switched off on the
PowerCenter.
™
STEP 2: Testing the HP Monster
®
Digital
PowerCenter
Plug your PowerCenter
™
directly into a properly
grounded 3-wire AC outlet. Turn the switch on to
test the unit. If the green “Protection On” light is
illuminated, then the PowerCenter
™
is on. Switch off
the PowerCenter
™
before proceeding to Step 3.
NOTE: If the “GROUND OK” light does not
illuminate, contact a qualified electrician.
STEP 3: Plugging in Your Components
•VerifythesurgeprotectorisswitchedtotheOFF
position before proceeding.