User guide

User Guide
18
VULKANO SETUP FOR MAC
Congratulations on buying Vulkano. We will take you through a few simple steps to get you up
and running.
These steps are for setting up your Vulkano from. If you are using a Windows 7 PC,
Windows Vista PC or aa Windows XP PC, please look in the Table of Contents of this User
Guide to find the appropriate section.
CONNECT VULKANO TO POWER
 Plug the power adapter into
Vulkano and a wall plug or
power strip.
CONNECT VULKANO TO NETWORK
 You can use either a wired or
Wi-Fi connection to attach
Vulkano to your home network.
 Wired connection: If your router is close to your Set Top Box, connect it to Vulkano using the
supplied Ethernet cable. Otherwise, follow the steps in “Wi-Fi connection” below to connect
Vulkano to your Wi-Fi network.
 You can connect Vulkano to your router, your PC or an open Ethernet connection on
your network.
 If you do not have an open port, you should purchase a 4-port Ethernet switch or hub.
 Wi-Fi connection: Use the supplied Ethernet cable to temporarily connect your Mac or PC’s
Ethernet port to your Vulkano’s Ethernet port. In step 2, you will be shown how to connect
Vulkano to your Wi-Fi network. Once Vulkano is connected to your Wi-Fi network, you will
disconnect the Ethernet cable.
 disconnect the Ethernet cable.
DOWNLOAD VULKANO MAC PLAYER
 Download Vulkano Mac Player from http://www.myvulkano.com/players.html
 After download is complete, install Vulkano Mac Player. (It takes a few minutes to download,
and then a few more minutes to install).
 When Vulkano Mac Player starts for the first time, the Setup program will run automatically.
 Important! If you see this on the screen: ,you should press the
“Update” button shown here: