User guide

User Guide
16
I couldn’t find a control that works. I want Vulkano to learn my remote control
codes.
For this option:
1. Select your Set Top Box type
2. Select a command from the list box
3. Click Learn
4. Follow the screen prompts
CHANNEL TUNING TEST – SINGLE DIGITS
In the Channel Tuning Test – single digits window:
1. Select the appropriate single digit channel
option
2. Select the check box option if you need to
press the Enter button on your TV remote
after entering a channel number
3. Click the Channel option and select a
single-digit channel
4. Click Test
If the channel tuning test works correctly:
 Click Next
CHANNEL TUNING TEST – MULTIPLE DIGITS
In the Channel Tuning Test – multiple digits:
 Click the Channel option and select a two or
three digit channel
 Click Test
If the channel selection drops digits, adjust the slider
accordingly.
If the channel option works
 Click Next