User guide

User Guide
7
CONFIGURE YOUR VULKANO
After switching on your Vulkano, the TV screen will be switched between
composite/component/HDMI channels, the Get Started screen will be displayed on your
television after around 10 seconds.
If you have connected your Vulkano to your TV with
the HDMI input:
 Press 1 on your Vulkano remote
Note: Make sure you do not press OK.
If you have connected your Vulkano to your TV with
the Component input:
 Press OK on your Vulkano remote
Note: Make sure you do not press “1”.
If you have connected your Vulkano to your TV with the Composite input:
 Press 2 on your Vulkano remote
ETHERNET (WIRED) HOME NETWORKS
If you connected your Vulkano to your router using
Ethernet,
 Press OK