User guide

User Guide

This can be called (depending on the router):

 DHCP reservation

 Static DHCP

 Reserved IP address

And requires you to enter both the IP address you wish to use and the MAC address of the

device in question (Vulkano). See your router’s documentation for more information on this

feature.

Q: I CAN’T FIND MY STB FROM THE IR REMOTE LIST, WHAT SHOULD I DO?

A: Vulkano has already covered the most common STBs in HK.

EI8ht, HKBN, Now TV HK, PixelMagic TV

Settings -> Advanced Setup ->STB model -> Select by device category -> Satellie

i-Cable

Settings -> Advanced Setup ->STB model -> Select by device category -> Cable

If you cant find from the list, you may also use the PC software (PC Setup Wizard) to learn your

device. Follow the setup process and learn your device key by key.

Q: HOW CAN I SET THE EPG FOR MY STB?

A: EPG is supported in USA and Canada only in the latest version.

Q: IF I AM ACCESSING THE VULKANO, CAN ANOTHER CHANNEL BE WATCHED AT THE SAME TIME

BY SOMEONE AT HOME OR DO WE HAVE TO WATCH THE SAME THING?

A: It is possible to watch two separate channels one on TV and another on multiple PCs in Local

Mode or One Client in remote Mode, provided that you have a digital cable Box/Set Top Box

with TWO tuners. In this case you have to connect the output from one tuner to Vulkano and

another tuner output to TV. Vulkano can control the first tuner through IR Blaster to select the

channel to be watched through Vulkano and the second tuner can be controlled by the TV

remote control to select channel to be watched on the TV.

Q: HOW CAN I RESET MY VULKANO TO FACTORY DEFAULTS?

In order to Reset Vulkano kindly follow these steps.

 Press and Hold the Reset Button on the back panel of Vulkano for 10 Seconds or until

the LED on the Top Panel of Vulkano Turns RED.