User guide

User Guide
12
To test the remote commands:
1. Press the CH+ and CH- buttons
2. Press OK Using the Arrow buttons on your
Vulkano remote:
 Select It worked if the remote commands work
 Select It didn’t work if the remote commands
failed, and follow the instructions
 Select Try again to test the remote commands
again
 Select Continue anyway to skip the test and try again later
 Press OK
REMOTE CONTROL
Using the Arrow buttons on your Vulkano remote:
1. Select the format you use when entering
single-digit channels to your STB
2. Press OK
Note: Some STB Cable and Satellite boxes require users
to enter leading zeros in front of single-digit channels.
For example: 7, 07, 007, 0007.
Using the Arrow buttons on your Vulkano remote:
1. Select Yes or No to specify if you need to press the Enter button when selecting a
channel using the Number buttons to your STB
2. Press OK
Using the Number buttons on your Vulkano remote:
1. Enter a valid two or three digit channel
2. Press OK