User guide

User Guide
4
HOOK UP THE CABLES
Congratulations on buying your Vulkano. We will take you through a few simple steps to get you
up and running. You can also setup your Vulkano from your PC. If you cannot set up your
Vulkano through your TV, please refer to the Vulkano Setup For PC/Mac section on page 36.
CONNECT VULKANO TO YOUR STB
Your STB has output connectors on the back for Component setup, Composite setup or both. If
you have both, use the Component setup for better video quality. You will need a STB to use
Vulkano.
Connect the cables from your STB output connectors to your Vulkano’s input connectors as
shown below. For the Component setup option, you will use two sets of cables. For the
Composite option, you will only use one set.
Suggestion: Be sure to write down your STB brand and model number. You will need it later in
the setup process.