User guide

User Guide

Select VIDEO INPUT

In the Select Video Input window:

1. Select the appropriate video input

configuration that corresponds to how you

connected Vulkano to your STB:

 Composite – if you used Red/White/

Yellow cables

 Component – if you used Red/Green/

Blue and Red/White/Yellow cables

2. Click Next

When you have selected the correct video input configuration, the video will be displayed in the

Video Input Configuration window.

Note: This step only appears if you have connected both Composite and Component cables.

Otherwise the input is auto-detected.

SET UP EPG (ELECTRONIC PROGRAM GUIDE)

In the Set Up EPG window:

1. Select your Country

2. Enter your ZIP/Postal Code

3. Click Next

Note: If your country is not listed here, then the EPG is

not available for it. Press Skip to continue.

In the Set Up EPG window:

1. Select your Service Provider from the

drop-down list

2. Select your Device Type:

 Analog Device

 Digital (non-rebuild)

3. Click Next

Note: The Analog Device option corresponds to SD cable. The Digital (non-rebuild) option

corresponds to HD cable.