User guide

User Guide
42
CONNECT TO STB
Once your Vulkano has been connected to your
wireless network, it will no longer be necessary to
have your Vulkano connected directly to your router.
1. Disconnect the Ethernet cable from your
Vulkano
2. If necessary, unplug the power supply from
your Vulkano and reconnect the audio and
video cables from your STB to your Vulkano
3. Reconnect the power supply
4. Click Next
Note: If your PC Player does not connect wirelessly to your Vulkano, connect your PC to your
router with an Ethernet cable and click Retry.
CONNECT VULKANO TO YOUR STB
Your STB has output connectors on the back for Component setup, Composite setup or both. If
you have both, use the Component setup for better video quality. You will need a STB to use
your Vulkano.
Connect the cables from your STB output connectors to your Vulkano’s input connectors as
shown below. For the Component setup option, you will use two sets of cables. For the
Composite option, you will only use one set.
Suggestion: Be sure to write down your STB brand and model number. You will need it later in
the setup process.