User guide

User Guide

VULKANO SETUP FOR PC/MAC

To set up your Vulkano through your computer, please refer to the following options:

 Vulkano Setup For Windows 7 And Vista

 Vulkano Setup For Windows XP

 Vulkano Setup for Mac

VULKANO SETUP FOR WINDOWS 7 AND VISTA

These steps are for setting up your Vulkano for Windows 7 or Vista. If you are using Windows

XP, please refer to the Vulkano Setup For XP section on page 40. If you are using a Mac, please

refer to the Vulkano Setup For Mac section on page 48.

CONNECT VULKANO TO YOUR STB

Your STB has output connectors on the back for Component setup, Composite setup or both. If

you have both, use the Component setup for better video quality. You will need a STB to use

Vulkano.

Connect the cables from your STB output connectors to your Vulkano’s input connectors as

shown below. For the Component setup option, you will use two sets of cables. For the

Composite option, you will only use one set.

Suggestion: Be sure to write down your STB brand and model number. You will need it later in

the setup process.