User guide

User Guide

DEVICE TYPE

Using the Arrow buttons on the Vulkano remote:

1. Select your Device Type:

 Analog Device

 Digital (non-rebuild)

2. Press OK

Note: The Analog Device option corresponds to SD

cable. The Digital (non-rebuild) option corresponds to

HD cable.

Note: The Device Type screen may not be displayed. If you cannot specify your device type in TV

setup, please refer to the Configure Your TV From Your PC (Wireless) > Set Up EPG (Electronic

Program Guide) on page 45.

SELECT STB MODEL

Using the Arrow buttons on the Vulkano remote, select

one of the following options:

 Select by device category

 Select by manufacturer name

 Use code learned with PC Setup Wizard

For Select by device category, use the Arrow buttons

on your Vulkano remote:

1. Select your STB type

2. Press OK

For Select by manufacturer name, use the Arrow

buttons on your Vulkano remote:

1. Select your STB manufacturer

2. Press OK

Note: Use the number keys to select the first letter.

For example, 2 = A, B, C, 2. Then use the Up/Down

Arrows to choose the exact manufacturer name.

Using the Arrow buttons on your Vulkano remote:

1. Select the STB Model

2. Press OK