Specifications

3
Section 1
SPECIFICATIONS
All specifications are referred to PLate VColtage unless otherwise specified.
Charging Voltage:
±10 to ±1000 volts, differential
adjustable 10 volts to 100 volts in 1 volt
increments
Zero Stability:
<100mV/sec
Timer:
0.1 to 999.9 seconds in 0.1 sec
increments
1000 to 9999 seconds in 1 sec
increments
Start Voltages:
1000 volts ±0.3% standard, adjustable
between 10 and 1000 volts in 1 volt
increments
Stop Voltages:
100 volts ±3% standard, adjustable
between 0 and 995 volts in 1 volt
increments
Peak Displays:
±peak voltage during float mode
Power:
90-250 VAC 50/60 Hz, internal 12 volt
battery with built-in charger (6
hr/charge)
Voltage Output Monitor:
divide by 200, 0.1%, speed of response
<10ms
Display:
240 x 64, character/graphic
Voltage Display:
3 ½ digit, ±1.0 volt resolution
Timer Display:
4 digit
Accuracy:
electrometer ±0.1% of reading, ±1 volt
referred to input
Bandwidth:
1kHz at 20V
p-p
, 10Hz at 2000V
p-p
Zero Drift:
<100mV/sec
Charge Plate Capacitance:
20pF, ±5%
Plate Self-discharge:
<200mV/sec
Operation Temperature:
5°C to 35°C
Temperature Sensor:
±2°C typ
Operating RH:
to 80%, non-condensing
Humidity Sensor:
±5% typ from 10% to 80% RH @25°C
Size:
11” x 9” x 6”
Weight:
12½ lb.
Specifications subject to change without notice
Accessories included:
Charge plate extension cable (5ft.)
Ground cable
Power cord
Operator’s Manual