User Manual

ADSL2/2+ Router
- 23 -
The device provides two Internet access configurations: DSL Uplink
and Ethernet Uplink. If you are using Ethernet Uplink (through network
cable) for Internet access, please click the “Advanced Settings” on t op
right corner of the interface to enter the configuration interface and
refer to section 2 of Chapter 4.2.2 WAN Service for configurations.
You need to configure the parameters below on this interface:
1. VPI/VCI
2. PPPOE User name
3. PPPOE Password
VPI/VCI: Different areas and ISPs have different VPI/VCI. For the
convenience of its users, the device has integrated many important
VPI/VCI. Therefore, you only need to select your ISP and area and the