User Manual

ADSL2/2+ Router
- 13 -
2.1.2 Back Panel
W300D’s Back Panel
ON/OFF: Power Switch. Press it in to turn on the power and press it
out to turn off the pow er.
WPS/RESET：Hold and press it for 1 second to connect WPS, and 7
seconds to bring all settings back to factory defaults.
Note:
Please use the supplied power adapter, for use of an unmatched
power adapter may damage the device.
LAN1/2/3/4：LAN network cable interface. It is used to connect Hub,
Switch, or computer in a LAN.
(LAN2 port can also be used to connect IPTV Set-top box to enable
watching TV and online surfing at the same time. When the access
way is changed into community broadband, LAN4 can be used as the
wireless Router’s WAN port.)
DSL: RJ11 i nterface for telephone line connection (It does not function
when the device is configured to use Ethernet uplink mode as access
mode).