Manualshelf

Owner manual

ManualsBrandsMonoprice ManualsAccessories for videoPID 8122 HDMI Extender Using Cat5e or CAT6 Cable Extend Up to 328ft
1234567
Extend HD AV to 100m over one Cat5e/6 CABLE
６
5.0 Connection and Operation
1) Connect the HDMI source (such as DVD, PS3, STB ) to the input of Sender.
2) Connect the output of Receiver to HDTV display.
3) Use a Cat5e/6 cable up to 100m to connect the Sender and Receiver.
4) Plug one power supply into the Sender and the other into the Receiver.
5) Power on the HDTV display and HDMI source.
Note: It is recommended to use one continuous run Cat5e/6 cable from one end to
the other. In some cases, connecting through a patch connector might not work.
Attention: Insert / Extract cable gently.
5.1 CONNECTION DIAGRAM