User Manual Table of Contents 1.0 Introduction……………………………………………………..1 2.0 Specifications……………………………….…………….……2 3.0 Package Contents………………………………………….…..2 4.0 Panel Descriptions…………………………………….…….…3 5.0 Connection and operation...................................................
Extend HD AV to 100m over one Cat5e/6 CABLE Extend HD AV to 100m Over One Cat5e/6 Cable Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. 1.0 INTRODUCTION The Extender is based on the HDBaseT technology.
Extend HD AV to 100m over one Cat5e/6 CABLE 2.
Extend HD AV to 100m over one Cat5e/6 CABLE 4.
Extend HD AV to 100m over one Cat5e/6 CABLE ①DC/5V ②Power Indicator The LED will turn on once the DC/5V provided. ③Link When LED is ”ON”, it indicates HDBaseT link connection established between the Sender and the Receiver over the Cat5e/6 cable. ④HDCP When the LED is ”ON”, it indicates a video content with HDCP protection is being transferred. When LED is “Blinking”, it indicates a video content without HDCP. When LED is “OFF”, it indicates no video is connected.
Extend HD AV to 100m over one Cat5e/6 CABLE ①DC/5V ②Power Indicator The LED will turn on once the DC/5V provided. ③Link When LED is ”ON”, it indicates HDBaseT link connection established between the Sender and the Receiver over the Cat5e/6 cable. ④HDCP When the LED is ”ON”, it indicates a video content with HDCP protection is being transferred. When LED is “Blinking”, it indicates a video content without HDCP. When LED is “OFF”, it indicates no video is connected.
Extend HD AV to 100m over one Cat5e/6 CABLE 5.0 Connection and Operation 1) Connect the HDMI source (such as DVD, PS3, STB ) to the input of Sender. 2) Connect the output of Receiver to HDTV display. 3) Use a Cat5e/6 cable up to 100m to connect the Sender and Receiver. 4) Plug one power supply into the Sender and the other into the Receiver. 5) Power on the HDTV display and HDMI source. Note: It is recommended to use one continuous run Cat5e/6 cable from one end to the other.
