User`s manual

If you are using the stand and base that comes with the monitor, you can

adjust the vertical angle of the monitor from -5 degrees (down) to +20

degrees (up). To adjust the angle, grasp the top and bottom edges of the

display, taking care not to touch the glass on the front. You can use clean

gloves or soft, dry cloths to aid in grasping the display edge without touching

the screen.

VIEW ANGLE ADJUSTMENT

1. Install the base or attach the monitor to a desk or wall mount, as desired.

(See MONITOR STAND & BASE)

2. Using the included video signal cables, connect video source devices to

the appropriate ports on the back of the monitor. You can have a different

video source device for each input.

3. Plug the DC power connector into the DC IN port on the back of the

monitor.

4. Plug the AC cord into the AC adapter, then plug the other end into a power

outlet.

INSTALLATION

5° 20°