User`s manual

To avoid personal injury or damage to your equipment, please adhere to the
following safety guidelines:
1. Do not place the monitor on an unstable surface where it could fall and
cause personal injury or damage to the monitor or other equipment.
2. Do not expose the monitor to water or moisture of any kind. Do not place
objects filled with moisture such that they could tip over and spill onto the
monitor.
3. If the monitor is exposed to moisture, immediately unplug the power source
and allow it to completely dry out before reapplying power.
4. Do not block the ventilation holes on the monitor. Do not place the monitor
in an enclosed space where it cannot get adequate ventilation or cooling.
5. Do not place the monitor near a heat source, such as a fireplace, radiator,
heater vent, etc.
6. The power supply for this monitor uses a NEMA 5-15 grounded plug.
Ensure that your power source is properly grounded. Do not use a "cheater"
plug to bypass the ground pin.
7. The monitor can be powered by a wide voltage range, from 100 to 240 V
AC at 50 or 60 Hz, with an AC current at least 3.75A. Ensure that your power
source supplies voltage within this operating range. If your power source is
not within this operating range, please consult your local power company.
8. If the monitor will be unused for a long period of time, turn it off and unplug
it from the power source. This will help prevent damage in the event of a
lightning strike or excessive power surge.
9. Do not attempt to open the case or service the monitor yourself.
10. Clean only with a soft, dry cloth. Do not use solvents or chemical cleaners
on the screen or casing.
11. Do not leave a single image on the display for an extended length of time.
Doing so could cause burn-in of the image, that is visible on the screen mask.
It is recommended to use a variable desktop background and to use a screen
saver to prevent burn-in. Alternatively, ensure that the monitor is powered off
for at least 2 hours out of every 12.
SAFETY GUIDELINES
2