Harmony Capsule 300 Portable Bluetooth® Speaker P/N 43248 User's Manual
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. • Avoid prolonged exposure to excessive volume levels, which could cause hearing damage. Reduce the volume to minimum before using this speaker, then increase the volume to a comfortable listening level. • Do not expose this device to excessively high temperatures.
CUSTOMER SERVICE The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to none. If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com. Check the website for support times and links.
PRODUCT OVERVIEW 1. Bluetooth® Button 6. Volume/Charging LEDs 2. TWS Button 7. Bluetooth LED 3. Power Button 8. Micro USB Charging Port 4. Volume- Button 9. 3.5mm Audio Jack 5. Volume+ Button 10.
CHARGING Perform the following steps to charge the speaker. 1. Plug one end of the included Micro USB Charging Cable into the USB Power Port on the speaker, then plug the other end into a USB power source, such as a computer, wall charger, or power bank (available separately). The Volume/Charging LEDs illuminate blue while charging is in progress. 2. When all four Volume/Charging LEDs are fully illuminated, the battery is fully charge.
BASIC OPERATION • With the speaker powered off, press and hold the Power Button for 2 seconds to turn the speaker on. • With the speaker powered on, press and hold the Power Button for 2 seconds to turn the speaker off. • With an active Bluetooth® connection, momentarily press the Power Button to pause or resume audio playback. • Momentarily press the Volume- Button to decrease the volume level. • Momentarily press the Volume+ Button to increase the volume level.
TRUEWIRELESS STEREO MODE If you have two 43248 speakers, you can connect them together to form a stereo pair for true stereo audio playback by performing the following steps. 1. Ensure that neither speaker is connected to a Bluetooth® device and that both 2. Power on both speakers, then momentarily press the Bluetooth Button to initiate speakers are powered off. TrueWireless™ Stereo Mode pairing.
SPECIFICATIONS P/N 43248 Frequency Response 80Hz ~ 20kHz Signal-to-Noise Ratio ≥ 75dB Total Harmonic Distortion ≤ 0.1% Drivers 2x 2.5" Nominal Impedance 4Ω Amplifier Output Power 2x 15 watts Bluetooth® Range Up to 32 feet (10 meters) Supported Bluetooth Profiles AVRCP v1.6, A2DP v1.3, HFP v1.7, HSP v1.2 Bluetooth Pairing Name MP43248 Ingress Protection Rating IP67 Input Power 5 VDC, 2A (USB) Output Power 5 VDC, 1A (USB) Battery Capacity 5000mAh Dimensions 10.6" x 4.3" x 4.
Modifying the equipment without Monoprice's authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
EU Conformity with applicable directives This equipment complies with the essential requirements listed below: • Radio Equipment Directive (RED) 2014/53/EU • RoHS 2 Directive 2011/65/EU with Directive (EU) 2015/863 UK Conformity with the relevant Union harmonization legislation This equipment complies with the essential requirements listed below: • Radio Equipment Regulations 2017 • Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 Monop
