3G USB Modem Compatibility List Network CDMA2000 EVDO USB 3G Modem EC189 EC169 EC1260 AC2726 AC2736 AC2746 AC580 AC560 MF637U DWM-162-U5 Anydata St802 Rw206 EVDO SRT-E800 Ev2000 EVDO E1916 1XEVDO Modem WOO ED6000 TD-SCDMA More than 20 kinds of EVDO ET128 MU350 MU351 AirCard901 HSPA WCDMA E1552 E1750 E169G E156G E172 E220 E270 E272 K3715 MF622 U302 OVATION: MC930D HSDP: 621B V818U USB Connect Mercury Mobile Nokia N95 Brand Testing result Huawei Huawei Huawei Huawei ZTE ZTE ZTE ZTE ZTE D-LINK Anyd
Wireless 3G-N1 Broadband Router Wireless 3G-N1 Broadband Router CONTENTS Copyright Notice Copyright Incorporated 2010. All rights reserved. Disclaimer Incorporated shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. Incorporated reserves the right to change product specifications without notice.
Wireless 3G-N1 Broadband Router Introduction： The Wireless-N 3G Router is a combined wired/wireless network connection device designed specifically for small business, office, and home office networking requirements. It complies with the IEEE 802.11n (Draft 2.0) standard. It adopts MIMO as well as SST technologies. It also works well with other 11b/g and 11n protocol wireless products.
Wireless 3G-N1 Broadband Router Getting Started Setting up a Wireless Infrastructure Network For a typical wireless setup at home (as shown above), please do the following: 1. You will need broadband Internet access (a 3G USB Modem or Cable, DSL-subscriber line into your home or office). 2. Consult with your 3G, Cable or DSL provider for proper installation of the modem. 3. Connect the 3G USB Modem, Cable or DSL modem to the Wireless 3GN1 Router 4. Adding computers to the Wireless 3G-N1 Router.
Wireless 3G-N1 Broadband Router Wireless 3G-N1 Broadband Router Configuring via Web Browser Open web browser and type http://192.168.0.1 in the browser's address box. This number is the default IP address for this device. After successfully login, the following Router Summary will be displayed on your web browser: The login screen below will appear. Enter the “User Name” and “Password” and click “OK” to login.
Wireless 3G-N1 Broadband Router Wireless 3G-N1 Broadband Router Setup the router mode LAN Settings To Setup the router mode, please follow the following instructions: Please click “Mode” located at the web management interface, the following message will be displayed on your web browser: Please click “LANSetup” located at the web management interface, the following message will be displayed on your web browser: Ø 3G Wireless Router Mode Wireless and LAN port connect to local network; the 3G USB modem
Wireless 3G-N1 Broadband Router Wireless 3G-N1 Broadband Router Connect to Internet (3G USB Modem) Connect to Internet (Gateway) Please click “Mode” located at the web management interface, select 3G Wireless Router Mode. The Router will restart. Please click “Mode” located at the web management interface, select Wireless Router Mode(Gateway). The Router will reboot. After Please click “3G→Setup” located at the web management interface, You can configure parameters for 3G function on the screen below.
Wireless 3G-N1 Broadband Router Wireless 3G-N1 Broadband Router WAN MAC Clone If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting, select 'STATIC (fixed IP)'. Enter the IP address / Subnet Mask / Default Gateway / MTU / Primary / Secondary DNS in dotted-decimalnotation provided by your ISP.
Wireless 3G-N1 Broadband Router Wireless 3G-N1 Broadband Router Dynamic DNS Wireless Base Configuration Please click “WAN (3G) -> DDNS” located at the web management interface, the following message will be displayed on your web browser: Please click “Wireless -> Basic” located at the web management interface, the following message will be displayed on your web browser: You could configure the minimum number of Wireless settings for communication, such as Network Name (SSID) and Channel.
Wireless 3G-N1 Broadband Router Wireless 3G-N1 Broadband Router Wireless Security Configuration Please click “Wireless-> Security” located at the web management interface, the following message will be displayed on your web browser: Please click “Wireless-> WPS” located at the web management interface, the following message will be displayed on your web browser: Setup the wireless security and encryption to prevent from unauthorized access and monitoring.
Wireless 3G-N1 Broadband Router Router Administrator Setup Change management password Default password of Wireless Router is “admin”, and it's displayed on the login prompt when accessed from web browser. There's a security risk if you don't change the default password, since everyone can see it. This is very important when you have wireless function enabled.
Wireless 3G-N1 Broadband Router Wireless 3G-N1 Broadband Router Firmware Upgrade Restore to Factory Default The system software used by this router is called as 'firmware', just like any applications on your computer, when you replace the old application with a new one, your computer will be equipped with new function. You can also use this firmware upgrade function to add new functions to your router, even fix the bugs of this router.
