Quick Installation Guide USB 2.0 Ethernet Adapter Part Number: SY-U2LAN 1. Unzip “MCS7830.v1.8.2.0.zip”, and open MCS7830. 2. The driver is under Win_Drv for Windows series. 3. Enter “Win_Drv”, and double click “Setup.exe”.
4. Click Install button. 5. After installation successfully completed, plug adapter into a usb slot. 6. Follow the steps below to open “Device manager”. Right click on “My Computer”, choose “Properties”, and then select “Hardware”, click “Device Manager.
7.
8. Choose “Install from a list or specific location (Advanced)”, and click “Next”. 9. Choose “Don’t search. I will choose the driver to install”, and click “Next”.
10. Click “Have Disk…” button, and locate “netmosu.inf”. 11. Driver was installed properly.