Specifications

6. If the monitor is installed and operating properly, the details section of the Tablet
PC Settings dialog will indicate "Pen Input Available", as shown in the following
image. If the Reset... button is NOT grayed out, click it to clear any previous
calibration data. Once the Reset... button is grayed out (as shown below), click
the Setup button.
7. Both screens will turn white and the following text will appear on one of them. If
the text is NOT on the pen display, press the ENTER key to move the text to the
other screen. Once the text is on the pen display, tap the screen with the tip of
the pen stylus to clear the text and white screen.
8. Click the Calibrate... button in the Tablet PC Settings dialog.
12