Instructions

21
1. On the Main Menu, rotate the Knob until the Control option is highlighted, then
press the Knob to enter the Control Menu.
2. Rotate the Knob until the Z Offset Setting option is highlighted, then press the
Knob. The printer will test the distance from the Nozzle to the Print Bed in several
places to determine the current Z offset. When it is done testing, the Adjust Z
Offset Screen is displayed.
3. Place a sheet of ordinary printer paper between the Nozzle and the Print Bed.
Rotate the Knob to adjust the Z offset until there is a slight amount of resistance
when moving the paper around between the Nozzle and Print Bed.
4. When the proper Z offset is set, press the Knob to return to the Control Menu.
Connect to Wi-Fi®
Note that the MP Cadet printer does not support 5G Wi-Fi® networks and cannot connect
if there are already 10 or more Wi-Fi connections.
1. On the Main Menu, rotate the Knob until the Control option is highlighted, then
press the Knob to enter the Control Menu.
2. Rotate the Knob until the Wi-Fi Network option is highlighted, then press the Knob
to enter the Wi-Fi® Network Menu.
3. Rotate the Knob until the Connect to Wi-Fi option is highlighted, then press the
Knob to display the Connect to Wi-Fi Screen.