User Manual

 Start Layers at Same Position: This option changes the accuracy of the model in the

same plane. It is generally set by default.

 Layer Start PositionX (mm): This option allows you to change the X axis coordinates

of the position of the model layer.

 Layer Start PositionY (mm): This option allows you to change the Y axis coordinates

of the position of the model layer.

Machine Tab

 Right Nozzle Diameter (mm): Sets the diameter of the nozzle on the right extruder.

This printer only has a single extruder, which is designated the right extruder. The

nozzle diameter of this printer is 0.4mm.

 Left Nozzle Diameter (mm): Sets the diameter of the nozzle on the left extruder.

This printer only has a single extruder, which is designated the right extruder.