User Manual

27
 Skirt Line Count: Sets the number of anti-overflow lines at the end of the model in
contact with the build platform.
Retraction Tab
 Horizontal Travel Retraction: Check this box to enable filament retraction when the
nozzle is not printing and is moving in a horizontal direction.
 Retract at Layer Change: Check this box to retract the filament when switching
from layer to layer.
 Retraction speed (mm/s): Sets the speed at which filament is retracted.
 Retraction distance (mm): The distance the filament is retracted within the nozzle.
 Z Hop Height (mm): The distance the nozzle is lifted when filament is returned after
retraction.
 Retraction Minimum Travel (mm): Sets the minimum nozzle movement distance
before printing and before retracting the filament.