User Manual

 Support Top Gap (mm): The distance between the top of the support and the

model surface. The smaller the distance, the more effective the support, but is more

difficult to remove from the model surface, resulting in residual material on the

model surface. The larger the distance, the less effective the support, but is easier

to remove from the model surface, resulting in a smoother surface.

 Support Bottom Gap (mm): The distance between the bottom of the support and

the model surface. The effects of this parameter are the same as the effects of the

Support Top Gap (mm) parameter.

 Distance X/Y (mm): The distance between the support and the model surface in the

horizontal plane. The effects of this parameter are the same as the effects of the

Support Top Gap (mm) parameter.

 Enable Support: Check this box to use supports.

 Support Top: Determines the thickness of the top layer of the supports.

 Support Bottom: Determines the thickness of the bottom layer of the supports.

 Support Interface: Sets the percentage of infill used inside the supports.

 Support Interface Infill Pattern: Use this drop-down menu to choose one of five infill

patterns for the supports, including Lines, Grid, Triangles, Zig Zag, and Concentric.

The pattern designs are the same as those of the infill patterns of the same name.