User Manual

14
value and return to the Move Axis Menu. This option will only be visible when
choosing 1mm or 0.1mm.
 Extruder: Select the Extruder option to open the Move Extruder Edit Screen. Rotate
the Control Knob to push filament in or out, then press it to save the value and
return to the Move Axis Menu. This option will only be visible when choosing 1mm
or 0.1mm.
Control Menu
 Main: Select the Main option to return to the Main Menu.
 Level bed: Starts the bed leveling process.
 Temperature: Opens the Temperature Menu.
 Door Open Check: Opens the Door Open Check Menu.
 Set Filament_Check: Opens the Set Filament_Check Menu.
 Set Z_Offset: Opens the Set Z_Offset Menu.
 Machine Info: Displays the Machine Info Screen.