User Manual

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed

below. If anything is missing or damaged, please contact Monoprice Customer Service for a

replacement.

1x 3D printer

1x 500g spool of PLA filament

1x Filament holder

1x 8GB microSD™ card

1x microSD™ card reader

1x Metal scraper

1x USB cable

1x Switch cable

1x Motor cable

1x Set of Allen keys

1x Roll yellow tape

1x Spanner

1x Stick of water washable glue

1x US power cord

1x UK power cord

1x EU power cord

5x User's manuals (English,

Deutsche, Español, Français,

Italiano)

MENU OPERATION

 The Control Knob to the right of the LCD Display is used to manipulate the menu.

 If on a menu or submenu, turn the Control Knob counterclockwise to move the

menu highlight up or to the left.

 If on a menu or submenu, turn the Control Knob clockwise to move the menu

highlight down or to the right.

 If on a menu or submenu, push the Control Knob to enter the highlighted submenu

or to select the highlighted entry for editing.

 If editing a value, turn the Control Knob counterclockwise to decrease the value.

 If editing a value, turn the Control Knob clockwise to increase the value.

 If editing a value, push the Control Knob to save the displayed value and return to

the previous menu or submenu.