MONOPRICE 1800-watt Portable Induction Cooktop P/N 18734 User's Manual
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. This device is intended for indoor use only. Do not expose this device to water or moisture of any kind. Do not place drinks or other containers with moisture on or near the device.
This device cooks using magnetic induction. If you have a pacemaker, check with your doctor to see if it is safe to be around this cooktop when it is in operation. Use only pots or pans suitable for use with induction cookers. Steel, cast iron, enameled iron, and stainless steel are compatible materials. As long as a magnet will stick to the bottom of the cookware, it is compatible with this cooktop. Any pots or pans used with this cooktop must have a flat bottom and measure between 4.7" ~ 10.
FEATURES Eight power settings (200, 500, 700, 900, 1100, 1300, 1600, and 1800 watts) Eight temperature settings (140°, 212°, 260°, 300°, 350°, 390°, 425°, and 460°F) One-button push to set power or temperature to the maximum value Adjustable time from 0 minutes to 4 hours in 1 minute increments Compatible with steel, cast iron, enameled iron, and stainless steel cookware Compatible with cookware with a flat bottom and measuring between 4.7" ~ 10.
CONTROL PANEL Lock: Press and hold for several seconds to engage or disengage the child safety lock. Timer: Press to set the timer. Temp: Press to change the display to temperature mode. Either the Temp or Power buttons must be pressed within 30 seconds of power on or the unit will go back into standby mode. Power: Press to change the display to power mode. Either the Temp or Power buttons must be pressed within 30 seconds of power on or the unit will go back into standby mode.
OPERATION 1. Place the unit on a stable surface, then plug it into a nearby AC power outlet. The unit will beep and the indicators will illuminate steadily for 1 second, then will begin flashing, indicating that it is in standby mode. 2. Place a suitable ferrous-based pot or pan with food or liquid on the center of the cooking zone. Do not attempt to heat an empty pot or pan. 3. Press the On/Off button to turn the unit on. The display will show on.
Q2: The display shows E0. A2: The unit is detecting that there is no cookware on the cooking surface or that the cookware is incompatible. Q3: The display shows E1. A3: A low voltage condition has been detected. Check the AC voltage level. Q4: The display shows E2. A4: A high voltage condition has been detected. Check the AC voltage level. Q5: The display shows E3. A5: The top plate has overheated. Ensure that you are using compatible cookware. Q6: The display shows E4.
Q9: The display shows E7. A9: The unit has detected an internal circuit error. If within the warranty period, return the product for a replacement. Otherwise, have the unit serviced by qualified personnel or replace it with a new unit. SPECIFICATIONS Model 18734 Compatible Cookware Ferrous-based, such as steel, cast iron, enameled Compatible Cookware Sizes 4.7" ~ 10.
