User`s manual

MONOPRICE 10707 Windows User's Manual

3. Replacing the Pen Tip

If the pen tip needs replacing or removal due to long-term storage, perform the following

steps as applicable:

1. Open the pen holder and remove the metal Pen Clip.

2. Position the Pen Clip over the exposed portion of the pen tip. Squeeze the clip

with your fingers to provide a firm grip on the tip.

3. Pull gently until the tip is completely removed.

4. Take a replacement tip out of the pen holder and gently insert it into the pen until

it is fully seated into place.

5. Use the Pressure Test dialog in the driver utility to test the operation of the newly

replaced tip.