Specification Sheet

Product Specication Created 9/21
HELPFUL TIPS
PAGE 3 OF 3
For questions about your
appliance, please call 1-800-626-2000.
4"
(10.2)
5"
(12.7)
24 3/16" (61.4) min
24 1/2" (62.2) max
cutout width
16 7/16"
(41.8)
16 7/8"
(42.9)
min cutout
height
E
FLUSH INSET INSTALLATION
FRONT VIEW
FLUSH INSET INSTALLATION
TOP VIEW
TOP VIEW
22" (55.9) mounting
cleat opening width
FLUSH INSET INSTALLATION
SIDE VIEW
23 1/2"
(59.7) min depth
1 3/16"
(3.0)
Side cleat
3/4" Shelf
(1.9)
ZWL1126SJ
A
Junction box location
(May also be located in
adjacent cabinet.)
B
To reduce the risk of tipping
of the drawer, the Anti-Tip
block must be properly installed
located 14-13/16" above the
oor on which the Microwave
Drawer will sit. The Anti-Tip
block must be provided and
pre-installed by the purchaser
of the product or builder before
install can be done. The Anti-
Tip block prevents serious
injury that might result from
spilled hot liquids.
C
Cleats may be visible and should
be nished to match cabinetry.
D
The face of the shelf must sit
1-7/8" back from the face of
the cabinet. See installation
instructions for further details
including the installation of 24"
ush mount deector vent.
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
4"
(10.2)
5"
(12.7)
22 1/8" (56.2) min
cutout width
18 1/2"
(47.0)
14 13/16"
(37.6)
cutout
height
E
STANDARD INSTALLATION
FRONT VIEW
STANDARD INSTALLATION
SIDE VIEW
23 1/2"
(59.7) min depth
ZWL1126SJ
4"
(10.2)
5"
(12.7)
22 1/8" (56.2) min
cutout width
18 1/2"
(47.0)
14 13/16"
(37.6)
cutout
height
E
STANDARD INSTALLATION
FRONT VIEW
STANDARD INSTALLATION
SIDE VIEW
23 1/2"
(59.7) min depth
ZWL1126SJ
STANDARD INSTALLATION
FLUSH INSTALLATION
A
B
A
B
C
D