Quick Specification

PAGE 3 OF 3
For questions about your
appliance, please call 1-800-626-2000.
HELPFUL TIPS
ANTI-TIP BRACKET INSTALLATION
A
The refrigerator is top heavy and
must be secured to prevent the
possibility of tilting forward.
WARNING:
Wood Wall and Floor
Construction:
• Drill the appropriate number of
1/8" (3 mm) pilot holes in the center
of each oor bracket hole being
used (a nail or awl may be used
if a drill is not available) AND
remove the locator template from
the oor.
• Mount the anti-tip oor bracket by
fastening the 2 , or recommended
4, #10-16 hex-head screws tightly
into place as illustrated in gure 3.
Attachment to Wall and Floor
Rear RH
Corner of the
Refrigerator
2 Screws
Must Enter
Wood or
Metal Stud
Wall
Plate
Stud
Floor
Bracket
Wall
Floor
A
AIR GAP INSTALLATION DIMENSIONS
Each Side 1/8" (.3 cm)
Top 1" (2.5 cm)
Back 2" (5.1 cm)
Product Specication Revised 7/20