Installation Instructions

8 31-1000602 Rev. 0

STEP 1 MEASURE CABINET

OPENING AVAILABLE VS.

REFRIGERATOR WIDTH

Measure width of cabinet opening where refrigerator

will be placed, W.

Be sure to account for any countertop overhang,

baseboard thickness and any clearance desired.

Width, W, should not be less than 36 inches. The

refrigerator will be placed approximately in the

middle of this opening.

Rear Wall

REFRIGERATOR

RH Side

Baseboard

Thickness

or Countertop

Overhang

(Whichever

is Greater) Plus

Any Desired

Clearance

Front

STEP 2 BEFORE MOVING

REFRIGERATOR INDOORS

IMPORTANT: Doors and passageways into

the installation location require a 31-1/2” (80 cm) min.

opening. If the opening is less than 31-1/2” (80 cm),

the top cap, doors and drawers must be removed. (See

steps 4–6.)

NOTE: Skip steps 4–5 if door removal is not required.

Go to page 10, Move The Refrigerator.

NOTE: To prevent damage, leave inside

packaging, door spacer and outside protective

wrap in place until the unit is moved to the

installation location.