Installation Guide

6 31-49161 Rev. 2
Installation Instructions
TOOLS REQUIRED
• Adjustable wrench
• 3/8” socket ratchet/driver
• Phillips head screwdriver
• Flat-Head ScrewdriveR
• 5/32”, 3/32”, 1/8”, 1/4” Allen wrenches
• 1/8” Drill bit and electric or hand drill
• Tape measure
• Pencil
• Wire cutters
• 1/4” Nut driver
• Level
• Torx T20, T25
MATERIALS REQUIRED
• 1/4” O.D. compression nut and 2 ferrules (sleeves)
OR SmartConnect
™
Refrigerator Tubing Kits
FLOORING
For proper installation, this refrigerator must be placed
on a level surface of hard material that is at the same
height as the rest of the flooring. This surface should be
strong enough to support a fully loaded refrigerator.
IMPORTANT NOTE: Protect the finish of the flooring.
Cut a large section of the cardboard carton and place
under the refrigerator where you are working.
GROUNDING THE REFRIGERATOR
IMPORTANT – (Please read carefully)
FOR PERSONAL SAFETY, THIS APPLIANCE MUST
BE PROPERLY GROUNDED.
The power cord of this appliance is equipped with a
3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall receptacle to minimize the pos-
sibility of electric shock hazard from this appliance.
Have the wall outlet and circuit checked by a qualified
elec tri cian to make sure the outlet is properly grounded.
Where a standard 2-prong wall outlet is en coun tered, it
is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
DO NOT, UNDER ANY
CIRCUMSTANCES, CUT
OR REMOVE THE THIRD
(GROUND) PRONG
FROM THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO CONNECT THE
REFRIGERATOR TO A 2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD WITH THIS
APPLIANCE.