Specifications

NOTES
ZWE23ESHSS
MONOGRAM 36" FREE-STANDING FRENCH-DOOR
BOTTOM-FREEZER REFRIGERATOR
Product Specification Revised 1/18
ANTI-TIP BRACKET INSTALLATION
AIR GAP INSTALLATION DIMENSIONS
A
The refrigerator is top
heavy and must be
secured to prevent the
possibility of tilting
forward.
WARNING:
WOOD Wall and Floor
Construction:
Drill the appropriate
number of 1/8” (3 mm)
pilot holes in the center
of each floor bracket
hole being used (a nail
or awl may be used if
a drill is not available)
AND remove the locator
template from the floor.
Mount the anti-tip oor
bracket by fastening the
2 , or recommended 4,
#10-16 hex-head screws
tightly into place as
illustrated in figure 3.
Attachment to Wall and Floor
Rear RH
Corner of the
Refrigerator
2 Screws
Must Enter
Wood or
Metal Stud
Wall
Plate
Stud
Floor
Bracket
Wall
Floor
A
Each Side 1/8" (.3 cm)
To p 1" (2.5 cm)
Back 2" (5.1 cm)