Specification Sheet
PAGE 2 OF 6
For questions about your
appliance, please call 1-800-626-2000.
Product Specication Revised 1/21
SPECIFICATIONS
Overall Width 36" (91.4 cm)
Overall Height 18" (45.7 cm)
Overall Depth 22" (55.9 cm)
Shipping Weight 92 lb (41.7 kg)
OVERALL DIMENSIONS
ZVW1360SPSS
ATTENTION ELECTRICIAN
ELECTRIC SUPPLY
These vent hoods must be supplied with 120V, 60Hz,
and connected to a properly grounded branch circuit,
and protected by a 15 or 20 amp circuit breaker or time
delay fuse.
• Wiring must be 2 wire with ground.
• If the electrical supply does not meet the above
requirements, call a licensed electrician before proceeding.
• Route house wiring as close to the installation location as
possible on the back wall or ceiling.
• Connect the wiring to the house wiring in accordance with
local codes.
GROUNDING INSTRUCTIONs
The grounding conductor must be connected to a ground
metal, permanent wiring system, or an equipment-grounded
terminal or lead on the hood.
WARNING
The improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check with
a qualied electrician or service representative if you are
in doubt whether the appliance is properly grounded.