Specifications

InstallationPreparation

REMOTE MOUNTING OF THE CONTROL

(WIRED}

-- ILWARNING: Disconnectelectrical

power from unit before beginning remote control

installation. Failure to do so could result in personal

injurg or damage to the electrical controls.

AVERTISSEMENT : llfaut

d_brancher I'alimentation 61ectrique de I'appareil

avant de commencer I'installation de la commande

distance. IIfaut suivre cette directive pour @viter

des blessures ou endommager les commandes

61ectriques.

REMOTE LOCATION FOR CONTROL

The control can be removed from the hood and

installed in a backsplash or countertop.

• A cover plate is provided to cover the opening in

the hood when the control is removed.

• A 30-ft. length of 4-wire cord is supplied to

accommodate most installations. Because onlg

30-ft. of cord is provided, careful consideration

must be given to the location of the remotelg

mounted control.

NOTE: Not for telecommunication (telephone}

network.

• The cord must be routed through the holes in the

insert sleeve, and the rubber grommets put into

place around the cord.

NOTE: On the ZVC30 and ZVC36 models, the cord

needs to be routed through the holes in the insert

sleeve before the damper plate is installed.

• Route the cord through the conduit to reach the

installation location of the control.

1-11116"

3-11/16"

Control cutout