Installation Instructions

8 INSTALL FILTERS

• Remove protective lm on the lters.

• Tip the lter into the slots at the rear of the opening.

Lift the ﬁlter and pull the knob forward until the ﬁlter

rests on the slots.

• Install all 3 grease lters.

• To remove the lters, grasp the knob, push the lter

towards the rear and tilt downwards.

124Dia23

124Dia24

9 FINALIZE INSTALLATION

• Remove the protective lm covering the control

panel on the front face of the hood, and any other

packaging materials.

• Refer to the Owner’s Manual for operating

instructions.

Note: While performing installations described in this book,

safety glasses or goggles should be worn.

For Monogram

local service in your area, call

1.800.444.1845.

Note: Product improvement is a continuing endeavor at

General Electric. Therefore, materials, appearance and

speciﬁcations are subject to change without notice.

Pub. No. 49-80095-1

04/08 JR

Printed in Italy

GE Consumer & Industrial

Appliances

General Electric Company

Louisville, KY 40225

ge.com