Owner`s manual

Installation Preparation
DETERMINE INSTALLATION HEIGHT
• Telescopic duct covers are provided to conceal
the ductwork running to the ceiling.
• This hood can be installed for vented or
recirculating operation. All necessarg parts are
shipped with the hood.
24" Minimum
30" Maximum
m
36" Minimum
II
NOTE: Installation height should be measured from
the cooking surface to the bottom of the hood.
The vent hood must be installed 24" min. and
30" max. above the cooking surface. The hood
installation height, from the cooking surface to the
bottom of the hood, depends upon ceiling height
and duct cover limitations.
DUCT COVER DIMENSIONS
9-7/16"
15-3
Z×8510SPSS Duct Cover Accessory
The accessorg is available for installation with ceiling
heights of 8' 7" to over i0 feet. This accessorg
consists of two 26-1/4" duct covers and one 31"
upper support frame piece.
ZV850/ZV855
Installation Heights
*Possible
RECIRCULATING
Installation
Height
24"
24" to 25"
24" to 26"
24" to 27"
24" to 28"
24" to 29"
24" to 30"
25" to 30"
26" to 30"
27" to 30"
28" to 30"
29" to 30"
:30"
24"
24" to 25"
24" to 26"
24" to 27"
24" to 28"
24" to 29"
24" to 30"
24" to 30"
24" to 30"
24" to 30"
24" to 30"
24" to 30"
24" to 30"
24" to 30"
24" to 30"
24" to 30"
25" to 30"
26" to 30"
27" to 30"
28" to 30"
29" to 30"
:30"
*Based on 36" countertop height.