Installation Instructions

9
PARTS PROVIDED
Locatethepartspackedwiththehood.
2StainlessSteelGreaseFilters
(3lterswith48"models)
Allen Wrench
ForImplementRods
Installation Preparation
DuctTransition
withDamper
Warming Shelf
Backguard2ImplementRodsand4Stand-os
Grease Tray
HeatLamp
(2with48"models)
761Dia28
490Dia57
761Dia30
HARDWARE
PACKAGE
Locateandcheckcon-
tents. Screws shown
actual size.
2 shoulder screws
to secure shelf to
bottom of hood.
2Phillipshead
machine screws
to secure shelf to
bottom of hood.
10Phillipsheadscrews:
Use 6 to secure hood to the
woodsupport:(2aresecured
towoodsupport)Use2tose-
cure30"and36"backguards
towall.Use4tosecurea48"
backguard.
4Phillipsheadscrewsto
secure the transition to
the hood outlet on the top
6(3/16")hollowwallan-
chors with screws, use 2 to
secure hood to the wall at
the bottom. Use 4 to secure
backguard and shelf.
4 screws to secure the
wood support to the wall
POZIDRIV3
1hexheadscrewand
lock washer, to secure
the blower
658Dia9
2atwashers
for wall anchors
490Dia66
Wood Support
with Original Screws