Installation Instructions

STEP 8 INSTALL IMPLEMENT

RODS

•Use a flat blade screwdriver to install stand-offs into

the bottom of the hood.

•Align implement rod to stand-offs with the screw hole

towards the inside of the hood. Secure the rod to the

stand-offs with the supplied Allen wrench.

•Follow the same procedure on the opposite side.

Screw

Stand-offs

Into

Hood

Use Allen

Wrench to

Secure Rod

to Stand-offs

FINALIZE INSTALLATION

•Install the supplied infrared bulb(s).

•See the Owner’s Manual for instructions to test

operation.