Owner`s manual

Care and Cleaning
Professional Range Hood
Stainless
steel
surfaces
(on some
models)
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steelsurface, use warm sudsg
water or a stainlesssteel cleaner or polish.Alwags
wipe the surface in the direction of the grain. Follow
the cleaner instructions for cleaning
the stainless steel surface.
To inquire about purchasing stainlesssteel
appliance cleaner or polish,or to find the location
of a dealer nearest gou,please call our toll-free
number:
National Parts Center
GEApplianceParts.com
1.800.626.2002
Light bulbs
The bulbs are located on the underside of
the hood.
To change the light bulbs:
1. Remove the trim ring bg turning it
counterclockwise.
2. Grasp the bulb on the edges and remove
bg turning it counterclockwise.
3. Replace with the same tgpe and size bulb.
These 120 volt, 50 watt, par 16 halogen flood
bulbs, with standard base, are available at
specialtg lighting stores.
These bulbs can also be ordered from gour
GEsupplier.
Order bulb no. WB08×10028.
I
¢
Warming
lamps
The warming lamps are located on the
underside of the hood.
These !20 volt, !75 watt, par 38 infrared heat
lamp bulbs, with standard base, are available
at some specialtg lighting stores.
These infrared bulbs can also be ordered
from gour GE supplier.
Order bulb no. WB08×10029.
NOTE: If warming lamps are not desired,
additional cooktop lighting can be obtained
bg replacing the infrared bulbs with standard
incandescent bulbs with up to 100 watt
maximum ratings, with standard bases. These
bulbs are available at specialtg lighting stores.