Owner`s manual

REMOVE THE PACKAGING
. Remove packages from the
"V" shaped cardboard section.
Remove shipping pads.
. Lift the hood out of the box.
IMPORTANT:
Lift the hood bg grasping the
outside edges of the exhaust
opening on the top.
Wood.
Mountinc
Support-
', ", i--Transition
', ,L ..... _ .......
Hood ,,,',, Parts
Motor ', ',,
Mounted
Shipping Carton
.The vent hood motor is
shipped secured to the skid
with 4 screws. Locate and
remove 2 screws on each
side of the motor. Discard the
shipping skid and screws.
. Grease filters must
be removed. Grasp
the latch, pull the
filter up and lift out.
. Lift to remove the grease
trags. Set grease filters and
trags aside for later installa-
tion. DO NOTDISCARD.
. From the inside of the hood,
loosen (do not remove) the
2 screws holding the wood
mounting support to the back of the hood. The screws
should be backed out of the wood to 1/4". Remove the
set aside the mounting support with screws for later
installation. DO NOTDISCARD.
__. Remove tape and packing material from the hood and all
supplied parts.
PARTS PROVIDED
Locate the parts packed with the hood.
Duct Transition
with Damper
HeatLamp
(2 with 48" models)
0000
2 Implement Rods and 4 Stand-offs
Allen Wrench
For Implement Rods
Backguard
2 Stainless Steel Grease Filters
(3 filters with 48" models)
Grease Trag
Wood Support
with Original Screws
HARDWARE PACKAGE
Locate and check contents.
Screws shown actual size.
6 (3/16") hollow
wall anchors with
screws, use 2 to
secure hood to
the wall at the
bottom. Use 4 to
secure backguard
and shelf.
/4 screws to secure the
wood supportto the wall
POZtDRIV 3
2 flat washers
for wall anchors
i_ 4 Phillips head screws to
secure the transition to
the hood outlet on the top
2 Phillips head
machine screws
to secure shelf to
bottom of hood.
!0 Phillips head screws:
Use 6 to secure hood to
the wood support: (2 are
secured to wood support)
Use 2 to secure 30" and 36"
backguards to wall. Use4 to
secure a 48" backguard.
1 hexhead screwand
lockwasher,to secure
the blower
c_2 shoulder screws
to secure shelf to
bottom of hood.
9