Installation Instructions

STEP 12 INSTALL FILTERS, FINALIZE INSTALLATION

•Remove protective film on the filters.

•Tip the filter into the lower slots at the rear of the

opening. Lift the filter and pull the knob forward

until the filter rests on the slots.

•To remove the filters, grasp the knob and push the

filter towards the rear and tilt downwards.

•Remove the protective film covering the control

panel on the front face of the hood, and any other

packaging materials.

•Check all 4 lamps to assure tightness in sockets.

•Refer to the Owner’s Manual for operating

instructions.

•Clean the hood with an approved stainless steel

cleaner.

Filter Slots