Installation Instructions

STEP 2 REMOVE THE PACKAGING

The vent hood is packed separately from the

decorative duct cover or accessory covers ZX1059SFSS

or ZX10510SFSS.

• Remove the frame, cover, parts box and packaging.

• Remove junction box cover.

• Install strain relief onto junction box cover.

STEP 3 CHECK INSTALLATION HARDWARE

Locate the hardware accessory pack shipped with the

hood and check contents.

3 Phillips head decorative screws

4 Filters

4 Lock Washers

Template

Service Safety

Stop Screw

Check service manual envelope taped to the side

of the hood to be sure it contains one stop screw.

Leave this screw in the envelope.

Check contents of the accessory package.

4 Machine Screws

Decorative Duct Covers

Support frames

with 8 screws

and 8 washers

4 Hex Head

Lag Screws

Mounting Screw Holes

Attachment

Screw Hole (Left Side)