Quick Specifications

ManualsBrandsMonogram ManualsWarming DrawersMonogram 30" Stainless Steel Warming Drawer

PAGE 1 OF 5

For questions about your

appliance, please call 1-800-626-2000.

Product Specication Created 10/19

THE MONOGRAM MINIMALIST COLLECTION

Streamlined design and precisely machined metals create a

contemporary yet functional aesthetic

1.9 CU. FT. CAPACITY

"ON" INDICATOR LIGHT

INFINITE SETTING TEMPERATURE CONTROL

VARIABLE HUMIDITY CONTROL

Crisp to moist

REMOVABLE HALF RACK

STAINLESS STEEL DRAWER FRONT

WITH MINIMAL HANDLE

Accepts 3/4" trimless custom panel and custom handle

with trim kit

FULL EXTENSION DRAWER ON BALL

BEARING GLIDES

ON/OFF ROCKER SWITCH

MONOGRAM 30" STAINLESS

STEEL WARMING DRAWER

ZTW900SSNSS

ADA

COMPLIANT

Summary of content (5 pages)

PAGE 1
MONOGRAM 30" STAINLESS STEEL WARMING DRAWER ZTW900SSNSS ADA COMPLIANT THE MONOGRAM MINIMALIST COLLECTION Streamlined design and precisely machined metals create a contemporary yet functional aesthetic 1.9 CU. FT. CAPACITY "ON" INDICATOR LIGHT INFINITE SETTING TEMPERATURE CONTROL VARIABLE HUMIDITY CONTROL Crisp to moist For questions about your appliance, please call 1-800-626-2000.
PAGE 2
ZTW900SSNSS OVERALL DIMENSIONS 1 3/8" 29.75" (75.5) (3.5) 9 1/4" 10 1/2" (23.5) cutout height SPECIFICATIONS (26.7) 28 1/2" (72.4) 5/8" Overall Width 29 3/4" (75.5 cm) Overall Height 10 1/2" (26.7 cm) Overall Depth 23 1/4" (59.0 cm) Drawer Capacity 1.90 cu. ft. (53.8 l) Cut-out Width 28 1/2" (72.4 cm) Cut-out Height 9 1/4" (23.5 cm) Cut-out Depth 23 1/2" (59.7 cm) Power Cord Length 56" (142.2 cm) Electrical Rating 450W @ 120V/60Hz Total Amps 15 Amps Net Weight 59 lbs. (26.
PAGE 3
INSTALLATION BELOW SINGLE OR DOUBLE WALL OVEN HELPFUL TIPS A W arming drawers are approved for installation below only certain specified wall oven and cooktop models. See the label attached to the top of the warming drawer for approved combinations. TOP VIEW ZTW900SSNSS Side cleats B A dditional clearance between cut-outs may be required. Check to be sure that oven supports above the warming drawer location do not obstruct the required interior 23-1/2" depth and 9-1/4" height.
PAGE 4
INSTALLATION BELOW A CABINET DRAWER HELPFUL TIPS A I f you are installing in frameless cabinets, it may be necessary to install 1/2" wide cleats to accept drawer mounting screws. See drawer for mounting screw locations. TOP VIEW TOP Side VIEW cleats ZTW900SSNSS ZTW900SSNSS B I nstall a 2"x2" or 2"x4" anti-tip block against rear wall, 9" from floor of cutout to bottom of block. The anti-tip block must be installed to prevent the drawer from tipping forward when opened and loaded.
PAGE 5
INSTALLATION WITH CUSTOM PANEL KIT - ZXD30B HELPFUL TIPS 3/4" (1.9) max. 30" (76.2) 10 1/2" 1 13/16" (4.6) (26.7) Drill 5/16" (0.8) through custom panel for lamp jewel • This kit contains a mounting panel to support a trim-less custom drawer front up to 3/4" thick. The original tubular handle can be reinstalled onto the custom panel with longer screws (not provided) or can be replaced with a custom handle of your choice (also not provided).