Product Specifications

ManualsBrandsMonogram ManualsWarming DrawersMonogram 30" Stainless Steel Warming Drawer

PAGE 1 OF 6

For questions about your

appliance, please call 1-800-626-2000.

Product Specication Created 10/19

MONOGRAM 30" STAINLESS STEEL

WARMING DRAWER

ZTW900PSNSS

THE MONOGRAM STATEMENT COLLECTION

Edge-to-edge handles, polished stainless steel, and

hand-finished edges convey a sense of solidity and beauty

1.9 CU. FT. CAPACITY

"ON" INDICATOR LIGHT

INFINITE SETTING TEMPERATURE CONTROL

VARIABLE HUMIDITY CONTROL

Crisp to moist

REMOVABLE HALF RACK

STAINLESS STEEL DRAWER FRONT

WITH MINIMAL HANDLE

Accepts 3/4" trimless custom panel and custom

handle with trim kit

FULL EXTENSION DRAWER ON BALL

BEARING GLIDES

ON/OFF ROCKER SWITCH

ADA

COMPLIANT

Summary of content (6 pages)

PAGE 1
MONOGRAM 30" STAINLESS STEEL WARMING DRAWER ZTW900PSNSS ADA COMPLIANT THE MONOGRAM STATEMENT COLLECTION Edge-to-edge handles, polished stainless steel, and hand-finished edges convey a sense of solidity and beauty 1.9 CU. FT. CAPACITY "ON" INDICATOR LIGHT INFINITE SETTING TEMPERATURE CONTROL VARIABLE HUMIDITY CONTROL Crisp to moist For questions about your appliance, please call 1-800-626-2000.
PAGE 2
ZTW900PSNSS OVERALL DIMENSIONS 29 3/4" (75.5) 1 13/16" (4.6) 9 1/4" 10 1/2" (23.5) cutout height (26.7) SPECIFICATIONS Overall Width 29 3/4" (75.5 cm) Overall Height 10 1/2" (26.7 cm) Overall Depth 23 1/4" (59.0 cm) Drawer Capacity 1.90 cu. ft. (53.8 l) Cut-out Width 28 1/2" (72.4 cm) Cut-out Height 9 1/4" (23.5 cm) Cut-out Depth 23 1/2" (59.7 cm) Power Cord Length 56" (142.2 cm) Electrical Rating 450W @ 120V/60Hz Total Amps 15 Amps Net Weight 59 lbs. (26.8 kg) Approx.
PAGE 3
INSTALLATION BELOW SINGLE OR DOUBLE WALL OVEN HELPFUL TIPS A W arming drawers are approved for installation below only certain specified wall oven and cooktop models. See the label attached to the top of the warming drawer for approved combinations. TOP VIEW ZTW900PSNSS Side cleats TOP VIEW C ZTW900PSNSS B A dditional clearance between cut-outs may be required.
PAGE 4
ZTW900PSNSS INSTALLATION BELOW A CABINET DRAWER HELPFUL TIPS ZTW900PSNSS ZTW900PSNSS A If you are installing in frameless cabinets, it may be necessary to install 1/2" wide cleats to accept drawer mounting screws. See drawer for mounting screw locations. TOP VIEW Side cleats TOP VIEW A B Install a 2"x2" or 2"x4" anti-tip block against rear wall, 9" from floor of cutout to bottom of block. The anti-tip block must be installed to prevent the drawer from tipping forward when opened and loaded.
PAGE 5
HELPFUL TIPS INSTALLATION WITH CUSTOM PANEL KIT - ZXD30B 3/4" (1.9) max. 30" (76.2) 10 1/2" For more details refer to the installation instructions for this product. 1 13/16" (4.6) (26.7) Drill 5/16" (0.8) through custom panel for lamp jewel • This kit contains a mounting panel to support a trim-less custom drawer front up to 3/4" thick.
PAGE 6
INSTALLATION ZTW900PSNSS 30" (76.2) 26" (66.0) 2 1/4" (5.7) Handle width 9 1/4" 10 1/2" (23.5) Cutou-out height (26.7) 28 1/2" (72.4) 5/8" (1.6) Cut-out width FRONT VIEW (SHOWING CUT-OUT OVERLAP) 27 15/16" (71.0) 23 1/4" (59.0) 1" (2.5) 1 11/32" (3.4) 2 13/16" TOP VIEW (7.1) 27 13/32" (69.6) Including Handle 9" (22.9) 27 19/32" (70.1) 23 1/4" (59.0) SIDE VIEW For questions about your appliance, please call 1-800-626-2000.