Specification Sheet

PAGE 4 OF 4 Product Specication Revised 5/22
HELPFUL TIPS
For questions about your
appliance, please call 1-800-626-2000.
A
This model is not approved for ush-mount
installation.
B
Junction box location (may also be located in
adjacent cabinet.)
C
Platform must be able to support 220 lbs (99 kg).
D
Minimum 31 1/4" from the top surface of the
countertop to the top surface of the wall oven
support platform when installed beneath a
certied cooktop.
E
Note this oven is only approved to be installed
under specic models as labeled on this unit.
F
Support platform made of 3/4" (1.9 cm) wood
is required. Must be capable of supporting
220 lbs (99 kg). Support Platform base to be
same height as toe kick.
G
Junction box location for wall oven.
(May also be located in adjacent cabinet).
H
Gas regulator and electric connections for
cooktops must be located in an adjacent
accessible location to the right.
I
Top and/or side llers may be necessary if
unit is positioned between existing cabinets.
Be sure they are attached securely, since they
will anchor the oven in the cabinet.
J
For ush oven installations, the cooktop cutout
must be set back 2 1/2" (6.4cm) plus the
cleat setback.
K
Dimension varies based on model. Example:
ZGU36 5 1/2" (14.0cm) from wall ZGU30
4 5/16" (11.0cm) from wall
L
Dimension varies based on model. Example:
ZGU36 0" (centerline)
ZGU30 12 1/16" (30.6cm) (centerline)
M
Dimension varies based on model. Example:
ZGU36 5 1/2" (14.0)cm, requires use of 90°
1/2" FPT x 1/2" FL brass street elbow ZGU30
5" (12.7cm)
N
Minimum 31 1/4" from the top surface of the
countertop to the top surface of the wall oven
support platform when installed beneath a
certied cooktop.
SIDE BY SIDE INSTALLATION
9 1/2"
(24.1)
If both ovens are French Door models, then 30" (76.2) min.
If the second oven is a drop down door model, then 14" (35.6) min.
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
5 1/4"
(13.3)
ELEC ELEC
ZET1FHSS
B
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
30" (76.2) flush inset width
with
1/8" (0.3) reveals
1 7/16"
(3.7)
27 1/4"
(69.2)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
5 1/4"
(13.3)
9 1/2"
(24.1)
28 1/2" (72.4)
cutout width
9/16" (1.5) Bottom cleat
(Extends full depth of cabinet)
3/4"
(1.9)
Side cleats
1 1/8"
(2.9)
Top cleat
28 15/16"
(73.6)
Flush inset
height with
1/8" (0.3)
reveal at top
and bottom
3/4"
(1.9)
5 1/4"
(13.3)
9 1/2"
(24.1)
28 1/2" (72.4)
min cutout width
23 1/2"
(59.7) min cutout depth
24 15/16"
(63.4)
cutout depth
24 15/16" (63.4)
cutout depth
23 1/2"
(59.7)
min cutout depth
2 1/2"
(6.4)
Side cleats
depth
3"
(7.6)
30" (76.2)
27 1/4"
(69.2)
31 1/4"
(79.4) min
Dimension varies
ZET1PHSS
TOP VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
FLUSH INSET INSTALLATION
FRONT VIEW
STANDARD INSTALLATION
FRONT VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
ELEC.
ELEC.
Side cleat
Top cleat
Bottom cleat
3/4" thick
platform
required
UNDERCOUNTER INSTALLATION
C
B
D
2" (5.1) min
2 1/2"
(6.4)
min
2" (5.1)
min
3/4" thick platform
required
2 7/8"
(7.4) max
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
C
L
GAS
21"
(53.3)
9 1/4"
(23.5)
31 1/4"
(79.4)
27 1/4"
(69.2)
ZET1PHSS
SIDE-BY-SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
FRONT VIEW
ELEC. ELEC.
ELEC
Wall oven
Cooktop
GAS
ELEC
Wall oven
UNDER COOKTOP INSTALLATION
L
K
J
B
F
G
H
I
M
N