Product Specifications
Product Specication Revised 4/21PAGE 4 OF 4
For questions about your
appliance, please call 1-800-626-2000.
HELPFUL TIPS
2" (5.1) min
2 1/2"
(6.4 ) min
21"
(53.3)
9 1/4"
(23.5)
2"
(5.1) min
3/4" thick platform
required
2 7/8"
(7.4) max
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
C
L
GAS
31 1/4"
(79.4) min
27 1/4"
(69.2)
ZET1SHSS
SIDE-BY-SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
FRONT VIEW
ELEC ELEC
ELEC
Wall oven
Cooktop
GAS
ELEC
Wall oven
2" (5.1) min
2 1/2"
(6.4 ) min
21"
(53.3)
9 1/4"
(23.5)
2"
(5.1) min
3/4" thick platform
required
2 7/8"
(7.4) max
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
C
L
GAS
31 1/4"
(79.4) min
27 1/4"
(69.2)
ZET1SHSS
SIDE-BY-SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
STANDARD INSTALLATION
SIDE VIEW
STANDARD INSTALLATION
SIDE VIEW
FRONT VIEW
ELEC ELEC
ELEC
Wall oven
Cooktop
GAS
ELEC
Wall oven
INSTALLATION WITH ADVANTIUM
AND WARMING DRAWER
SIDE BY SIDE INSTALLATION
A
Dimensions per Advantium or
Microwave Oven requirements
B
Dimension per Warming Drawer
requirements
C
Note this oven is only approved to
be installed under specic models
as labeled on this unit.
D
Support platform made of 3/4" (1.9
cm) wood is required. Must be
capable of supporting 220 lbs (99
kg). Support Platform base to be
same height as toe kick.
E
Junction box location for wall oven.
(May also be located in adjacent
cabinet).
F
Gas regulator and electric
connections for cooktops must be
located in an adjacent accessible
location to the right
G
Top and/or side llers may be
necessary if unit is positioned
between existing cabinets. Be sure
they are attached securely, since they
will anchor the oven in the cabinet.
H
For ush oven installations, the
cooktop cutout must be set back
2 1/2" (6.4cm) plus the cleat setback.
I
Dimension varies based on model.
Example:
ZGU36 5 1/2" (14.0cm) from wall
ZGU30 4 5/16" (11.0cm)
J
Dimension varies based on model.
Example:
ZGU36 0" (centerline)
ZGU30 12 1/16" (30.6cm)
(centerline)
K
Dimension varies based on model.
Example:
ZGU36 5 1/2" (14.0cm), requires
use of 90° 1/2" FPT x 1/2" FL brass
street elbow ZGU30 5" (12.7cm)
L
Minimum 31 1/4" from the top
surface of the countertop to the top
surface of the wall oven support
platform when installed beneath a
certied cooktop.
UNDER COOKTOP INSTALLATION
H
I
D
C
J
L
F
G
23 1/2" (59.7) min
cutout depth
27 1/4"
(69.2)
32 1/2" (82.6)
Recommended and
16 1/4" (41.3) min
Cutout location
from floor
2"
(5.1) min
2"
(5.1) min
STANDARD
INSTALLATION
STANDARD INSTALLATION
SIDE VIEW
ZET1FHSS
A
B
E
K
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.